Russell Hobbs RH1247B Instruction Manual page 48

SECTION 11: AUTOMATIC FAULT WARNINGS AND WHAT
TO BE DONE
TROUBLE CODE POSSIBLE
FAULT
- Water faucet may be
closed. Check.
- Mains water may be cut-off.
Check.
- If so, switch the programme
knob to position 0. You can
select a programme and run
your machine after the mains
water is supplied.
- Mains water pressure may
be low. Check.
Water cut-off
- Water inlet hose may be
or low mains
twisted. Check.
water
- Water inlet hose may be
pressure..
clogged.
- Clean water inlet hose
filters. (*)
- Valve inlet filter may be
clogged.
- Clean the valve inlet filters.
(*)
If the problem persists,
unplug your machine, turn off
your faucet and contact the
nearest authorised service.
Pump is - Pump filter may be clogged.
faulty or Clean the pump filter. (*)
pump filter is - Discharging hose may be
clogged or clogged or twisted. Check the
electrical discharging hose.
connection If the problem persists,
of the pump contact the nearest
is faulty. authorised service. (*)
48
WHAT TO DO