Table of Contents
Advertisement
SECTION 10: TROUBLESHOOTING
FAULT
Excessive foam is
formed in the
detergent drawer.
Unsatisfactory
washing result.
POSSIBLE CAUSE
Excessive amount of
detergent used.
Wrong detergent
used.
The dirtiness of your
laundry does not
match the programme
you have chosen.
Amount of detergent
used insufficient.
Laundry in excess of
maximum capacity
put in your machine.
44
REMOVING
METHODS
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litre of water, and
pour the mixture in
the detergent drawer.
After 5-10 minutes,
press on Start/Pause
button again. For next
washing operation,
decide the dose of
detergent as required.
Use detergents
produced only for
automatic washing
machines in your
machine.
Select the programme
appropriate for correct
dirtiness of your
laundry. (see
programme table)
Adjust the amount of
detergent based on
the dirt level of your
laundry.
Load your machine
with laundry, amount
of which shouldl not
exceed maximum
laundry capacity
Hide quick links:
Advertisement
Table of Contents
