Page 1
Please read these instructions before Please read these instructions before assembly and use of this product. assembly and use of this product. Adult assembly is required. Adult assembly is required. No tools required for assembly. No tools required for assembly. R6070 R6070 www.fi sher-price.com...
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact ® Fisher-Price for replacement parts and instructions if needed. Never substitute parts. Assembled Parts...
Page 4
Hint: You may need the help of another adult to steady the product during assembly steps 1-4. Base Tube • While pressing the button on the end of one of the base tubes, fit it into a tube on one of the hubs, as shown. Hint: Each hub is designed to fit on the base tubes one way.
Page 5
Seat Tubes PRESS PULL PULL • Press the button on each hub and pull apart the seat tubes. • Make sure you hear a "click" on each end. Warning Label • Position the pad so that the button holes are toward the warning label on the seat.
Assembly • Pull the bottom of the pad around the seat. • Buckle the straps on the pad to the straps on the seat. Make sure you hear a "click" on both sides. PRESS PRESS PRESS PRESS PRESS PRESS • Press the pad edges onto the fasteners on the seat.
Page 7
Waist Belt Crotch Pad • Place your child in the seat. • Position the crotch pad between your child’s legs. • Fasten both waist belts to the crotch pad. Make sure you hear a “click” on both sides. • Tighten each waist belt so that the restraint system is snug against your child.
Page 8
Storage PRESS PRESS PUSH PUSH • Press the button on each hub and push the seat tubes together. • Lean against a wall for storage. • The pad and toy are machine washable. Wash separately in cold water on the gentle cycle. Do not use bleach. Tumble dry the pad PUSH PUSH separately on low heat and remove promptly.