Table of Contents
Advertisement
6.
Select the bank file you are looking for, and touch Open to
open it. A list of User (or Favorite Style) items appears.
7.
Select the item you are looking for, and touch Load to con-
firm the load. A dialog box appears, asking you to select
one of the available User (or Favorite Style) locations in
memory.
In the dialog box above, the previously selected Style will be
loaded into location 01 of the bank U01 (USER1 button) in
memory. The existing Style at the same memory location
will be deleted and overwritten.
Empty locations are named <empty>.
8.
Select the target location, and touch OK to load the source
file.
Warning: After confirming, the item you are overwriting in
memory will be deleted.
Note: If a Sound or Drum Kit based on external PCM sam-
ples is deleted, choose the "Delete" command from the page
menu of the Sampling mode to delete the unused samples (see
the "Advanced Edit" addendum in the Accessory CD).
Note: If you are loading a Sound or Drum Kit that makes use
of an external PCM sample, the sample is automatically
loaded (unless it is already in memory). This way, all needed
samples are always loaded together with the Sound or Drum
Kit making use of them. See also "PCM Autoload" and "Load
PCM button" on page page 264.
Loading Pa800 data
You can load Pa800 data exactly as if they were Pa2X data. At the
same time, Pa2X data can be read by any Pa800.
Note: Do not load the Global file of Pa800 to Pa2X, or vice-versa.
Global files are exclusive to a particular model, and can cause mal-
functioning if loaded to a different model.
Media edit mode
Loading Pa1X data
You can load Pa1X data exactly as if they were Pa2X data. Minor
differences might exist between effect parameters. Also, keep in
mind Voice Harmony is only 3 voices in the Pa2X, while it is 4
voices in the Pa1X. Some other parameters are missing in the
Voice Processor section.
At the same time, most Pa2X data can be read by any Pa1X (pro-
vided it is fitted with Operating System v. 3.0 or higher). How-
ever, keep in mind the following:
•
Pa2X has a more extensive range of effects, that might not
exist on the Pa1X.
•
Due to the different content and organization, the Song-
Book will point to different Styles.
•
Styles with Guitar Mode and Fixed NTT tables are not
loaded.
Loading Pa80/60/50 data
You can load Pa80/60/50 data exactly as if they were Pa2X data.
The only difference is that the "SOUND" folder of Pa2X is called
"PROGRAM" in the Pa80/60/50. Therefore, to load Sounds
from Pa80/60/50 disks, you must accomplish one of the follow-
ing operations:
•
Either rename the "PROGRAM" folder "SOUND" (by
using a personal computer) before loading a ".SET" folder;
or
•
First load the ".SET" folder, then separately load the ".PCG"
file from the "PROGRAM" folder.
Loading i-Series data
Pa2X is compatible with the Styles of the older i-Series instru-
ments. You can load them as if they were ordinary Pa2X data.
1.
Copy the old i-Series data into an USB device, or transfer
them to the internal SSD-U area or hard disk of the Pa2X.
2.
Press MEDIA to go to the Media mode. Select the Load
page if needed.
3.
While in the Load page, select the device containing the i-
Series data from the Device pop-up menu.
4.
If you are reading an i30 file, select the ".SET" folder and
touch the Open button in the display.
5.
Select the ".STY" folder.
6.
At this point, you can load the whole ".STY" folder, or open
it and select a single Style.
• To load the whole folder, touch the Load button in the
display. If it contains more than 16 Styles, they will be
loaded into the USER banks sequentially, otherwise you
will be prompted to select one of the three USER Style
banks or the ten FAVORITE Style banks in memory. Once
the target bank is selected, touch Load to load the bank.
The "Are you sure?" message will appear. Touch OK to con-
firm, or Cancel to abort.
255
Load
Advertisement
Table of Contents
