Download Print this page

Outdoor Temperature - La Crosse Technology WS-9611U-IT Instruction Manual

Wireless weather station
Hide thumbs Also See for WS-9611U-IT:

Advertisement

Outdoor Reception
Symbol
Transmitter identification No.
(only shown when more than
one transmitter is used)
TOGGLING AND RESETTING THE MIN/MAX READINGS:
1.
To toggle between the MIN/MAX data for indoor temperature and humidity and
outdoor temperature press and release the MIN/MAX key.
Once to show the MAX outdoor temperature data with the recorded time and date
Twice to show the MIN outdoor temperature data with the recorded time and date
Three times to show the MAX indoor temperature and humidity data with the
recorded time and date
Four times to show the MIN indoor temperature and humidity data with the
recorded time and date
A five times to return to normal display with current data.
2.
To reset any MIN or MAX data, press and hold the SET key for about 4 seconds.
This will reset the currently displayed MIN or MAX recorded data to the current
temperature and humidity readings.
1.
The distance of the Weather clock or transmitter should be at least 1.5 to 2
meters away from any interfering sources such as computer monitors or TV sets.
2.
Avoid positioning the weather station onto or in the immediate proximity of metal
window frames.
3.
Using other electrical products such as headphones or speakers operating on the
same signal frequency (915MHz) may prevent correct signal transmission and
reception.
4.
Neighbors using electrical devices operating on the 915MHz signal frequency can
also cause interference.
Note:
When the 915 MHz-signal is received correctly, do not re-open the battery cover of either
the temperature sensor or wireless weather station, as the batteries may spring free from
the contacts and force a false reset. Should this happen accidentally then reset all units
(see "Setting up" above) otherwise transmission problems may occur.
The transmission range is approximately 330 feet (100 meters) from the temperature
sensor to the wireless weather station (in open space). However, this depends on the
surrounding environment and interference levels. If no reception is possible despite the
observation of these factors, all system units have to be reset (see "Setting up" above).
Outdoor
temperature
Maximum icon
37
39
Note: It is required to reset the outdoor MIN/MAX temperature records of different
channels separately (if there are more than 1 wireless sensor used).
In normal display mode, press the CH/ + button to select a channel. The channel ID will
be displayed under the outdoor temperature reading.
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting mode anytime during the manual setting modes, press the
SNOOZE key anytime or wait for automatic timeout. The mode will return to normal time
display.
LED BACKLIGHT
The backlight is automatically switched ON when any keys are pressed. The backlight
will be switched on for approximately 10 seconds before automatically switching OFF.
ABOUT THE OUTDOOR WIRELESS TEMPERATURE SENSOR
The range of the temperature sensor may be affected by the temperature. At cold
temperatures the transmitting distance may be decreased. Please bear this in mind when
positioning the sensor. The battery life may be reduced as well at cold temperatures.
CHECKING FOR 915MHz RECEPTION
If the outdoor temperature data is not being received within 3 minutes after setting up (the
display shows "- -. - °F" and "- -%" on the outdoor section of the wireless weather station
after 3 attempts during normal operation), please check the following items:
POSITIONING
WEATHER STATION:
The Weather station comes complete with a foldout stand that gives the option of table
standing or wall mounting.
To wall mount:
1.
Fix a screw into the desired wall, leaving the head extended out
the by about 0.2"(5mm).
2.
Using the Weather clock's hanging hole, carefully hang it onto
the screw.
Note: Always ensures that the unit locks onto the screw head before
releasing.
POSITIONING THE WIRELESS TEMPERATURE SENSOR:
The Transmitter is supplied with a holder that may be attached
to a wall with the two screws supplied. The Transmitter can
also be position on a flat surface by securing the stand to the
bottom to the Transmitter.
38
40

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Tx29u-it