Pad Edit: Copy From Style; Pad Edit: Copy From Pad - Korg Pa800 User Manual

152 Pad Record mode

Pad Edit: Copy from Style

Pad Edit: Copy from Style
Here you can copy a track from a Style, and transform it into a
Pad pattern.
Warning: The Copy operation deletes all data at the target location
(overwrite).
After setting the various parameters, touch Execute.
Note: If you copy too many events on the same "tick", the "Too
many events!" message appears, and the copy operation is aborted.
Note: When you copy over an existing Chord Variation, Program
Change data is not copied, to leave the original Sounds unchanged
for that Chord Variation.
From Style
Choose this option to select the source Style to copy the track
from. Touch the Select button to open the Style Select window
and select the source Style.
From E/CV (Style Element/Chord Variation)
Use this parameter to select the source Style Element and Chord
Variation.
Var1...End2 A single Style Element, i.e., all Chord Variations.
V1-CV1...E2-CV2
A single Chord Variation.
From Track
Use this parameter to select the source track to copy.
Drum-Acc5 Single track of the selected Style Element or
Chord Variation.
To CV (Chord Variation)
Use this parameter to select a target Chord Variation inside the
current Pad.
CV1...CV6 Target Chord Variation.
Execute
Touch this button to execute the operation set in this page.

Pad Edit: Copy from Pad

Here you can copy a Chord Variation from a different Pad. Fur-
thermore, you can copy a whole Pad.
Warning: The Copy operation deletes all data at the target location
(overwrite).
After setting the various parameters, touch Execute.
Note: If you copy too many events on the same "tick", the "Too
many events!" message appears, and the copy operation is aborted.
Note: When you copy over an existing Chord Variation, Program
Change data is not copied, to leave the original Sounds unchanged
for that Chord Variation.
From Pad
Choose this option to select the source Pad to copy the Chord
Variation from. Touch the Select button to open the Pad Select
window and select the source Pad.
From CV (Chord Variation)
Use this parameter to select the source Chord Variation.
All All Chord Variations, i.e. the whole Pad. You can't
change the target, that is automatically set to All.
CV1...CV6 Single Chord Variation.
To CV (Chord Variation)
Use this parameter to select a target Chord Variation inside the
current Pad.
CV1...CV6 Target Chord Variation. Automatically set to All if
the "From CV" parameter is also set to All.
Execute
Touch this button to execute the operation set in this page.