Korg PS60 Owner's Manual page 55

MIDI Filter
Prog Chg (Enable Program Change)
On: Program changes will be transmitted and
received.
When a performance receives program data on a
channel that matches the global MIDI channel, the
performance will be switched.
When you switch performances, a program change
will be transmitted on the global MIDI channel and
on the MIDI channel of each timbre whose "Status"
(p. 30) is EXT or EX2.
Note: The programs selected for each timbre cannot
be switched by receiving MIDI data.
Off: Program changes will not be transmitted or
received.
Bank Chg (Enable Bank Change)
On: The Bank Select control change message will be
transmitted together with program change
messages. This is valid when "Prog Chg" is On.
Off: Bank Select messages will not be transmitted or
received.
AfterTouch (Enable Aftertouch)
On: MIDI aftertouch messages will be transmitted
and received.
Off: MIDI aftertouch messages will neither be
transmitted nor received.
The PS60's keyboard is not able to transmit either
channel aftertouch or polyphonic aftertouch. Since
aftertouch is supported as an AMS, aftertouch
messages can be received to control an assigned
parameter.
Ctrl Chg (Enable Control Change)
On: Control change messages will be transmitted
and received.
Off: Control change messages will neither be
transmitted nor received.
SysEx (Enable System Exclusive)
On: System Exclusive data will be transmitted and
received.
Choose the On setting if you want to edit the PS60
from a connected computer or vice versa.
Off: System Exclusive data will not be transmitted.
Normally you will leave this unchecked.
Global settings Quick parameters
Controllers
[Off, On]
JS Lock
This specifies the range in which the joystick's effect
can be locked.
Joystick lock will apply to the range you specify, as
follows. X: the entire X-axis, Y: the entire Y-axis, +Y: the
+Y direction, –Y: the -Y direction, XY: the entire range
of the X-axis and Y-axis.
X
PEDAL/SW 1
[Off, On]
Type
Specify the type of the controller that is connected
to the ASSIGNABLE PEDAL/SW1/DAMPER jack.
Damper: Choose this if a damper pedal is
connected.
Switch: Choose this if a pedal switch is connected.
[Off, On]
Pedal: Choose this if a foot pedal is connected.
Sw (Foot Switch function)
This is shown if "Type" is set to Switch. It specifies
the function that will be controlled by a pedal
switch (optional PS-1) connected to the DAMPER/
PEDAL/SW1 jack.
No Function: No function
Foot Switch: Foot switch on/off (CC#82)
Porta.SW: Portamento switch on/off (CC#66)
[Off, On]
Sostenuto: Sostenuto pedal on/off (CC#66)
Soft: Soft pedal on/off (CC#67)
Damper: Damper pedal on/off (CC#64)
Perf Up: Increment the performance number
Perf Down: Decrement the performance number
[Off, On]
Value Inc:  button
Value Dec:  button
Tap Tempo: Tap tempo
JS+Y: Joystick +Y (CC#01)
JS-Y: Joystick –Y (CC#02)
CC#16 (Rbn): Control change (CC#16)
JS Lock: Joystick lock on/off
Note: If you specify a function that includes a CC#,
that MIDI control change message will be
transmitted each time the pedal switch turns on/off.
( "List of Foot Switch assignments," PG p.128)
[X, Y, +Y, –Y, XY]
Y +Y -Y
[Damper, Switch, Pedal]
[No Function...JS Lock]
XY
51