Copy MFX/EQ
This command copies the effect or EQ settings from a
program or performance saved in the PS60's memory
to the performance that you're currently operating.
From Mode
This specifies whether the copy-source will be a
program or a performance.
Src (Source)
[A000: name..., 000: name...]
This selects the bank and number of the copy-source.
FX
This selects whether you'll be copying effect or EQ
settings.
Procedure
1. Access the Command page.
2. Press the button, and then use the buttons
to choose the Copy MFX/EQ command.
3. Press the button, and then turn the VALUE
knob to select the copy-source.
Prog: programs, Performance: performances
4. Select the number whose settings you want to
copy. Press the button, and turn the VALUE
knob to make your selection.
Use the program's bank number (e.g. "A000") if you're
selecting a program.
Note: The bank number will appear if you press the
CURSOR/VALUE buttons simultaneously when
the program name is shown in the performance
(p. 18).
5. Select the effect that you want to copy. Press the
button, and then turn the VALUE knob to make
your selection.
6. Press the to get the OK? prompt, and then press
the button to execute.
If you decide not to execute, press any other button.
[Prog, Perf]
[All, Mod. Rev/Dly, EQ]
Performance edit Quick parameter list
35