Lap.belt.installation - Fisher-Price Safe Voyage EF20B User Manual

Forward-Facing Installation
4.. . K neel.on.the.restraint.to.push.it.into.the.
vehicle.seat.while.removing.slack.from.the.
vehicle.lap-shoulder.belt.(Fig. 3).
5.. . H old.the.lap.and.shoulder.belts.together.
behind.the.latch.plate.and.unbuckle.(Fig. 4)...
6.. . T hread.the.locking.clip.onto.both.belts..
(Fig. 5),.placing.it.within.1/2.inch.of.the.latch..
plate.(Fig. 6)..
7.. . B uckle.the.belt.again...The.belt.should.be.tight.
around.the.restraint..If.not,.remove.the.locking.
clip.and.repeat.Steps.2–7..
8.... V erify.that.all.connections.are.secure.and.the.
restraint.is.stable..A.secure.restraint.should.allow.
no.more.than.1.inch.of.side-to-side.or.forward.
movement.at.the.belt.path..See "Check Buckle
Position" on page 30.
3
4 5
1/2"
6
28
Forward-Facing Installation
Lap Belt Installation
Figure1illustratesatypicalforward-facing
vehiclelapbeltinstallation.
warning
Always use in upright position in
forward-facing mode. See page 11.
IMPORTANT!When installing the restraint with
vehicle belts, store the lower hooks in storage
slots under cover (see page 16, Fig. 2).
1.. . W ith.the.restraint.in.the.upright.position,.place.
it.forward-facing.in.the.vehicle.seat..
  I MPORTANT!Installation can be improved by
using the tether (see pages 32–33).
2.. . P ull.the.vehicle.belt.out,.then.pass.it.through.
both.forward-facing.belts.slots.
3... . . V erify.that.the.vehicle.belt.is.not.twisted,.then.
buckle.(Fig. 2)..Pull.on.the.vehicle.belt.to.
make.sure.it.is.securely.buckled.
4.. . K neel.on.the.restraint.to.push.it.into.the.vehicle.
seat.while.removing.slack.from.the.vehicle.belt.
(Fig. 3).
5.. . V erify.that.all.connections.are.secure.and.the.
restraint.is.stable...A.secure.restraint.should.
allow.no.more.than.1.inch.of.side-to-side.or.
forward.movement.at.the.belt.path.(see "Check
Buckle Position" on.page.30).
1
2
3
29