Jenn-Air Pro-Style CVG4380 Use And Care Manual page 7

To achieve optimum cooking performance use cookpots with flat bottoms and tight fitting
covers. Flame size should be adjusted so it does not extend beyond the edge of the
cookware. This instruction is based on safety considerations. Adjusting the size of the
flame to fit the size of the cookware also helps to save fuel
Important: Leave a minimum of 1_/2 " between side of pan and surrounding surfaces,
such as countertop backsplash or side walls, to allow heat to escape to avoid possible
damage to these areas.
• Aluminum cookware heats evenly and quickly. A slightly larger flame size can be
used. The f_ame can be adjusted so it comes to the edge of the cookware. However,
the fLameshould NEVER be adjusted so that it extends beyond the bottom of the
cookware.
• Stainless steel cookware with copper or aluminum cores heat evenly end faidy
quickTy. The flame size should be adjusted to extend only halfway between center
and edge of the cookware bottom for best results.
• Cast iron cookware heats slowly.
• Check manufacturer's recommendations before using porcerainon stee_,porcelain
on cast iron, glass, glass-ceramic, eatlhenware or other gJazedcookpots.
If the cookware is covered, Lessfuel wiLlbe needed. Therefore, a lower flame size can
be used.
Note: Food will not cook any faster when more than the amount of heat needed to
maintain a gentle boil is used.
7