Table of Contents
Advertisement
Listening to the radio
1 Press
SRC to select "TUNER."
2 Press
(BAND) repeatedly to select a band (FM1/ FM2/ FM3/ MW/ LW).
"F1" / "F2" / "F3" / "MW" / "LW" appears on the display.
3 Press 4 / ¢ to search for a station.
Adjust [SETTINGS] mode settings
While listening to the radio...
1 Press the volume knob to enter [FUNCTION] mode.
2 Turn the volume knob to select [SETTINGS], then press to enter.
3 Turn the volume knob to make a selection, then press to confirm.
See table below for selection.
4 Hold
to finish the procedure.
Item
LO.SEEK
LO.S ON: Searches only FM stations with good reception. ; LO.S OFF *: Cancels.
Selects the tuning mode for 4 / ¢ buttons.
SEEKMODE
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
memory. ; MANUAL: Manually search for a station.
A-MEMORY
<Y>/ N *: Automatically starts memorizing 6 stations with good reception. ; Y /<N>: Cancels (automatic
memorizing is not activated). (Selectable only if [TYPE NML] is selected for [PRESET].) (page 6, 7)
MONO SET
MONO ON: Improve the FM reception (but the stereo effect may be lost). ; MONO OFF *: Cancels (stereo
effect resumes).
Selects the available Program Type (see table on page 9). Then, press 4 / ¢ to start searching.
PTY SRCH
Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
(ENGLISH */ FRENCH/ GERMAN), then press to confirm.
TI
TI ON: Allows the unit to temporarily switch to Traffic Information. ; TI OFF *: Cancels.
NEWS SET
NEWS 00M – NEWS 90M: Sets the time for receiving the next news bulletin. ; NEWS OFF *: Cancels.
AF SET
AF ON *: Automatically searches for another station broadcasting the same program in the same Radio Data
System network with better reception when the current reception is poor. ; AF OFF: Cancels.
8
Hold for about 2 seconds to memorize the current station.
Press briefly to recall memorized station.
Selectable setting (Preset: *)
Advertisement
Table of Contents
