Using Other External Components; Av-In - Kenwood DDX4028BT Instruction Manual

Using other external components

To display the source control screen (☞ below)
or
AV-IN name (
[Mode] Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
• This setting does not affect the source name "VIDEO" displayed on
[MENU] Displays <Top Menu> screen.

AV-IN

You can connect an external component to
the AV-IN terminal on the monitor panel.
Preparation:
Select <AV-IN> for <AV Input> setting.
(☞page 40)
1
Connect an external
component.
AV mini cord (CA-C3AV:
optional accessory)
• Pressing FNC/R-CAM hides the operation buttons.
• The operation buttons disappear by touching the screen or
when no operation is done for about 5 seconds.
• To change settings for video playback, ☞ page 35.
☞
below)
☞
page 30
<Top Menu>.
2
Select "VIDEO" as the source.
(☞ page 11)
3
Turn on the connected
component and start playing
the source.
29
English