Related Manuals for Kenwood DDX4028BT
Summary of Contents for Kenwood DDX4028BT
- Page 1 DDX4028BT DDX4058BT DDX3028 DDX3058 MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © 2010 Kenwood Corporation All Rights Reserved. LVT2200-001A (EN/QN)
-
Page 2: Table Of Contents
Setting the clock ......8 Adjusting the touch position ......41 Common operations ..... 9 BLUETOOTH OPERATIONS Turning on the power ..........9 (Only for DDX4028BT/DDX4058BT) Turning off the power ..........9 Information for using Bluetooth® Adjusting the volume ..........9 Putting the unit in standby ........9 devices ........42... -
Page 3: Before Use
Pictures may not be synchronized with the sound or How to read this manual: picture quality may decline in such • Illustrations of DDX4028BT/DDX4058BT environments. are mainly used for explanation. • < > indicates the variable screens/ menus/operations/settings that appear on the touch panel. - Page 4 (applicable for EU countries that have 192-8525 Japan adopted separate waste collection EU Representative’s: systems) Kenwood Electronics Europe BV Products and batteries with the Amsterdamseweg 37, 1422 AC UITHOORN, symbol (crossed-out wheeled bin) The Netherlands cannot be disposed as household waste.
-
Page 5: Introductions
INTRODUCTIONS Initial Settings Initial setup Finish the procedure. When you power on the unit for the first time or reset the unit, the initial setting screen appears. • You can also change the settings on the <Setup> screen. (☞ page 38) Language Select the text language used for on-screen... -
Page 6: Setting The Security Function
On <Setup>: • To clear the registered security code, perform step and press [CLR] in The security indicator on the monitor <Security Code>. panel flashes when the vehicle ignition is off. To cancel, select <OFF>. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 7: Component Names And Functions
• Displays the current source screen. (Press) • Selects the AV source for external monitor or amplifier. (Hold) 7 For DDX4028BT/DDX4058BT : TEL/V.OFF button • Displays the <Hands Free> screen. (Press) (☞ page 43) • Turns off/on the screen. (Hold) (☞... -
Page 8: Setting The Clock
(☞ below) 1 Adjust the hour 2 Adjust the minute [Reset]: Sets the minute to “00. ” Example: 3:00 – 3:29 = 3:00 3:30 – 3:59 = 4:00 Finish the procedure. Appears only when the navigation unit is connected. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 9: Common Operations
(Hold) Adjusting the volume To adjust the volume (00 to 35) Decrease Increase To attenuate the sound Turning off/on the screen DDX4028BT/ DDX3028/ DDX4058BT DDX3058 The ATT indicator lights up. (Hold) (Hold) To cancel the attenuation, press the volume adjustment knob. -
Page 10: Switching Screens
Goes to the next chapter/ chapter/track.* track.* Displays the source control screen. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. Not available for video from an external component and rear view camera. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 11: Av Source Operations Selecting The Playback Source
You can select 3 items to be displayed in this area. ( page 39) When no navigation unit is connected, “No Navigation” appears. Only for DDX4028BT/DDX4058BT . ☞ Select an appropriate input setting on <AV Input>. ( page 40 ) -
Page 12: Disc Operations
” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “ , ” operations will not be accepted. • When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 13: Playable Disc Type
Playable disc type Disc type Recording format, file type, etc Playable DVD-Video * Region Code: • For DDX4028BT/DDX3028: 2 • For DDX4058BT/DDX3058: 5 DVD-Audio/DVD-ROM DVD Recordable/ DVD-Video Rewritable DVD-VR * (DVD-R/-RW * DivX /MPEG1/MPEG2 +R/+RW * • DVD Video: UDF bridge JPEG •... -
Page 14: Playback Operations
] Selects folder. Displays folder/track list. (☞ page 15) ☞ To display the Original Program/Playlist screen, page 16. Does not appear for DVD/DVD-VR. Appears only for DVD/DVD-VR/VCD. Search speed varies depending on the type of disc or file. Does not appear for VCD. DDX4028BT/DDX4058BT/DDX3028/DDX3058... - Page 15 To display the source control screen (☞ below) • Pressing FNC/R-CAM hides the operation buttons. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. For CD/MP3/WMA/WAV/AAC Track/file information • Touching [<] scrolls the text if all the text is not shown. Media type Playing time Playback status...
- Page 16 [ Picture Displays picture adjustment • The screen for MPEG1/MPEG2 differs from Adjust] screen. (☞ page 35) the above. [Aspect] Selects aspect ratio. (☞ page 36) [ZOOM] Displays the picture size selecting screen. (☞ page 36) DDX4028BT/DDX4058BT/DDX3028/DDX3058...
- Page 17 Only for VCD • To deactivate the PBC function, press [7] then the direct selecting buttons to select a track number. Selecting playback mode For DVD/DVD-VR Selects Repeat playback mode For VCD (without PBC)/CD/DivX/MPEG1/ MPEG2/MP3/WMA/WAV/AAC ☞ Direct selecting buttons ( below) Selects Random Selects Repeat...
-
Page 18: Settings For Disc Playback
: Plays back audio files and DivX/MPEG1/MPEG2 ♦ Audio&Video files. • For playable file types, ☞ page 13. • If the disc contains no files of the selected type, the existing files are played in the following order: audio, video, then still picture. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 19: Usb Operations
USB operations Playing a USB device • This unit can play JPEG/DivX/MPEG1/ Cautions: MPEG2/MP3/WMA/WAV/AAC files stored in • This unit may not play back files in a USB mass storage class device. USB device properly when using a USB • This unit can recognize a total of 5 000 files extension cord. - Page 20 Audio&Video Plays back audio files and 4:3 LB DivX/MPEG1/MPEG2 files. (Letterbox) • If the USB device contains no files of the 4:3 PS selected type, the existing files are played (PanScan) in the following order: audio, video, then still picture. DDX4028BT/DDX4058BT/DDX3028/DDX3058...
-
Page 21: Listening To The Ipod/Iphone Device
Listening to the iPod/iPhone device Preparation Connecting iPod/iPhone Settings for iPod playback When the source is “iPod”... To iPod/iPhone • Use the following cables: – To listen to the music (digital): USB Audio cable for iPod/iPhone—KCA-iP102 (optional accessory) – To watch the video and to listen to Audiobooks Selects the speed of the music (analog): USB Audio and... -
Page 22: Ipod/Iphone Playback Operations
You cannot resume playback for video sources. When using iPod nano (1st Generation) or iPod with video (5th Generation), you can control playback only from the unit. For the latest compatible list and software version of iPod/iPhone, see: www.kenwood.com/cs/ce/ipod DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 23: Selecting A Track/Video From Menu On The Ipod/Iphone
Selecting a track/video from menu on the iPod/iPhone Video menu: Switches between Music ( ) and Video ( ) Select the menu (Music or Video) (1), a category (2), • Available categories differ depending on then a desired item (3). the type of your iPod/iPhone. -
Page 24: Listening To The Radio
• The search method differs according to the selected activated. seek mode (☞ above) [Text] Displays/hides the [MENU] Displays <Top Menu> information of the current ☞ station ( page 25). screen. Appears only when FM is selected as the source. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 25: Storing Stations In Memory
Displaying the information of the Storing stations in memory current station You can preset six stations for each band. Automatic presetting — AME (Auto Memory) (Hold) Hides the text information Text information Scrolls the text information Local stations with the strongest signals are To tune in FM stations only with strong searched and stored automatically. -
Page 26: Selecting A Preset Station
PTY code as you have selected, that station is tuned in. • Only English/Spanish/French/German/ Dutch/Portuguese are available for the text language here. If another language has been selected in <Language> (☞ page 40), the text language is set to English. DDX4028BT/DDX4058BT/DDX3028/DDX3058... - Page 27 Activating/deactivating TI/News Standby Reception TI Standby Reception News Standby Reception TI indicator NEWS indicator TI indicator TI Standby Reception Lights in The unit will temporarily white switch to Traffic Information (TI) if available. Lights in Not yet activated. Tune in to orange another station providing the Radio Data System signals.
-
Page 28: Auto Tp Seek
(the AF indicator lights up). AF Reg Switches to another station broadcasting the same program (the AF indicator lights up). Cancels. • The RDS indicator lights up when the Network-Tracking Reception is activated and an FM Radio Data System station is found. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 29: Using Other External Components
Using other external components To display the source control screen (☞ below) • Pressing FNC/R-CAM hides the operation buttons. • The operation buttons disappear by touching the screen or when no operation is done for about 5 seconds. • To change settings for video playback, ☞ page 35. ☞... -
Page 30: Using The External Navigation Unit
Settings for navigation unit NAV Setup Press [Enter] to display the setup screen for On <Top Menu>: the navigation unit. See the instruction manual supplied for the navigation unit. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 31: Sound Adjustment
Sound adjustment Using the sound equalization • The adjustment is memorized for each source until you adjust sound again. If the source is a disc, the adjustment is stored for each of the following categories. – DVD/DVD-VR – VCD/CD – DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC •... -
Page 32: Adjusting The Cross Over Frequency
Selects the phase for the subwoofer. * Adjusts the subwoofer level. Adjustable only when the subwoofer is activated. ☞ page 35) Adjustable only when the subwoofer is ☞ activated. ( page 35) Not selectable when <Freq> is set to <Through>. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 33: Changing The Display Design
Changing the display design You can change the background and panel color. To select a panel color On <Top Menu>: Variable color illumination • Illumination color changes gradually. For making your own color ☞ adjustment, below Making your own color adjustment •... - Page 34 Not displayed when playing an iPod/ iPhone. Capture the image displayed on the screen. Confirmation message appears. Press [Yes] to store the newly captured image. (The existing image is replaced with the new one.) • Press [No] to return to the previous screen. DDX4028BT/DDX4058BT/DDX3028/DDX3058...
-
Page 35: Setting For Video Playback
Setting for video playback You can change the setting for video playback. Picture adjustment Adjust the picture (–15 to +15). You can adjust the picture quality. Display the adjustment menu. Adjusts the brightness Adjusts the contrast Adjusts the black Adjusts the color Adjusts the tint* Adjusts the sharpness Adjustable only when the incoming signal is... -
Page 36: Changing The Aspect Ratio
For 16:9 original pictures JUST: For 4:3LB [5] [∞] [2] [3] : Moves the zooming original frame. pictures Normal*: For 4:3 original pictures Auto: • For “DISC”/”USB” only: Aspect ratio is automatically selected to match to the incoming signals. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 37: Using A Rear View Camera
Using a rear view camera • To use a rear view camera, the REVERSE lead connection is required. For connecting a rear view camera, see the INSTALLATION MANUAL. Activating the rear view Displaying the picture from camera the rear view camera The rear view screen is displayed when you On <Top Menu>: shift the gear to the reverse (R) position. -
Page 38: Setting Menu Items
: Activates the subwoofer. : Cancels. ♦ OFF Speaker Select Select the size of the connected speaker. ♦ Standard/Narrow/Middle/Wide You can change the setting only when the unit is in standby. Selectable only when <Subwoofer> is selected for <Preout Setup>. DDX4028BT/DDX4058BT/DDX3028/DDX3058... - Page 39 Menu item Selectable setting/item Initial: Underlined Dimmer ♦ Auto : Dims the screen and button illumination when you turn on the headlights. • The ILLUMI lead connection is required. (☞ INSTALLATION MANUAL) ♦ ON : Activates dimmer. ♦ OFF : Cancels. ♦...
- Page 40 Select the text language used for on-screen information. ♦ English /Spanish/French/German/Italian/Dutch/ Russian/Portuguese/Chinese-Simplified/Chinese- Traditional/Thai/Turkish/Arabic/Persian/Hebrew/ Greece; Initial for DDX4028BT/DDX3028: English, for DDX4058BT/DDX3058: Russian • For external monitors, only English/Spanish/French/German/ Italian/Dutch/Russian/Portuguese are available. If another language has been selected, the text language for external monitors will be set to English.
-
Page 41: Memorizing/Recalling The Settings
Memorizing/recalling the Locking the settings settings You can lock the settings to prevent them from being changed. You can memorize the settings changed • is shown beside the settings that can in the <Setup> menu and recall the be locked. memorized settings anytime. -
Page 42: Bluetooth Operations
BLUETOOTH OPERATIONS (Only for DDX4028BT/DDX4058BT ) Information for using Bluetooth® devices • While driving, do not perform complicated operation such as dialing the numbers, using phone book, etc. When you perform these operations, stop your car in a safe place. -
Page 43: Connecting Bluetooth Devices
Connecting Bluetooth devices Connecting a new Bluetooth For connecting a Bluetooth audio player device for the first time When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device. Pairing allows Bluetooth devices to communicate each other. -
Page 44: Deleting A Registered Bluetooth Device
<Bluetooth Mode> To connect Confirmation message appears. Press [Yes]. Select the device you want to connect. • All registered devices (mobile phone and audio player) are listed on <Connect Device>. – Selectable items depend on the device you are operating. DDX4028BT/DDX4058BT/DDX3028/DDX3058... -
Page 45: Using The Bluetooth Mobile Phone
Using the Bluetooth mobile phone Receiving a call Switching between handsfree mode and phone When a call comes in/making a call... Call information mode (if acquired) Ends/rejects the call While talking... Status of the device/Battery reminder (only Each time you press the button, the talking when the information comes from the method is switched ( : handsfree... -
Page 46: Making A Call
Hold : Adds “+” Presets the entered phone number on the ☞ preset list ( page 47) • You can enter up to 32 numbers. Speak the name you want to call. • To cancel, press [Cancel]. DDX4028BT/DDX4058BT/DDX3028/DDX3058... - Page 47 Presetting the phone Copying the phone book numbers You can copy the phone book memory of a mobile phone into the unit (up to 400 You can preset up to 6 phone numbers. memories). On <Top Menu>: On <Top Menu>: Select an item from phone book/call lists.
- Page 48 Connected mobile phone • You cannot delete data when <Phone> is selected. Select the item you want to delete. Unit Delete all the numbers/ names in the selected item A confirmation message appears. Press [Yes]. DDX4028BT/DDX4058BT/DDX3028/DDX3058...
-
Page 49: Using The Bluetooth Audio Player
Using the Bluetooth audio player • To register a new device, ☞ page 43. • To connect/disconnect a device, ☞ page 44. Tag data (current track title/ artist name/album title) * • Touching [<] scrolls the text if all the text is not shown. Playing time * Playback status * (3: play / 8: pause) - Page 50 Changes the PIN code of the unit. • Touch the current PIN code, enter a new PIN code, then press [Enter]. Device Name Shows the device name to be shown on the Bluetooth device — “KENWOOD BT MM-5U2. ” Device Shows the MAC address of the unit.
-
Page 51: Reference Maintenance
REFERENCE Maintenance Caution on cleaning the unit To keep discs clean Do not use A dirty disc may not play correctly. any solvent If a disc does become dirty, wipe (for example, it with a soft cloth in a straight line thinner, from center to edge. -
Page 52: More About This Unit
(except those stored on an iPod). cannot be played. – Files which have the data such as AIFF, ATRAC3, etc. Kenwood bears no responsibility for any loss of data in an iPod/iPhone and USB mass storage class device while using this unit. - Page 53 Sound signals emitted through the rear terminals Through the analog terminals (Speaker out/ Front Preout/ Rear Preout) 2-channel signal is emitted. When playing multi-channel encoded disc, multi-channel signals are downmixed. Language codes (for DVD/DivX language selection) Code Language Code Language Code Language Code...
-
Page 54: Troubleshooting
The call has not ended yet. Park your car, and use the connected mobile phone to end the call. “Pick Up Error” The unit has failed to receive a call. “Pairing Mode Error” Pairing between the unit and Bluetooth device has failed. Register the device again. (☞ page 43) DDX4028BT/DDX4058BT/DDX3028/DDX3058... - Page 55 If there seems to be a problem Symptom Remedy/Cause No sound comes out of the • Adjust the volume to the optimum level. speakers. • Check the cords and connections. No picture is displayed on the Turn on the screen. (☞ page 9) screen.
- Page 56 Echo or noise occurs. Adjust the microphone unit position. The unit does not respond when You may have tried to copy the same entries (as you try to copy the phone book stored) to the unit. to the unit. DDX4028BT/DDX4058BT/DDX3028/DDX3058...
-
Page 57: Specifications
Video Decoder (Max 2 Mbps) Effective Pixels : MPEG1/MPEG2/ DivX : 99.99% Audio Decoder Pixel Arrangement : MP3/WMA/AAC/WAV (Linear PCM) : RGB striped arrangement Bluetooth section (DDX4028BT/ Back Lighting : LED DDX4058BT) Technology DVD player section : Bluetooth Ver.2.0 Certified D/A Converter Frequency : 24 bit : 2.402 –... -
Page 58: Fm Tuner Section
Storage Temperature Range : –20°C – +85°C Frequency Range (9 kHz) : 531 kHz – 1611 kHz Weight : 2.0 kg Usable Sensitivity (DDX4028BT/DDX4058BT ) : 25 μV 1.9 kg Video section (DDX3028/DDX3058 ) Color System of External Video Input : PAL/NTSC... - Page 59 • Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS 2.0+ Digital Out and the DTS logos are trademarks of DTS, Inc. Product includes software.
-
Page 60: Ks-Ubt1 (Usb Bluetooth Adapter)
Power Consumption: 54.3 mA/5 V (max.) • This adapter has been designed exclusively Dimensions (L × W × H): for use with Kenwood car receivers. Do not 15 mm × 19 mm × 5.6 mm use this adapter with any other car receiver. - Page 61 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English Svenska Français Suomi Slovensko Deutsch Slovensky Dansk Ελληνικά...