Table of Contents
Advertisement
Disassembling the Camera
Connecting the Power Wiring
Connect the power supply cable to the power connectors.
Select one of the following options.
Caution
Note
Gently remove the screw to take off camera housing (4)
Remove the inner liner (3) by pulling it free of the two notches (2) in the housing.
Set the camera housing (5) and liner (3) aside.
For DC12V
Connect 12 V (-) to terminal =DC12V -
Connect 12 V (+) to terminal =DC12V+
For AC24V
Connect 24 V (~) cables to terminals ~AC24V.
PoE
Connect the network cable to the RJ45 terminal using a switch.
If using a DC supply, make sure the polarity is correct. Incorrect connection
may cause malfunction and / or damage to the camera.
Connectors and field wiring terminals for external Class 2 circuits provided with
marking indicating minimum Class of wiring to be used. Class 2 shall be
marked adjacent to the field wiring terminals.
3
Advertisement
Table of Contents
