Recording A Band - Roland R-26 Owner's Manual

Recording a Band

When setting the input level, have the band play the loudest section of the song while you adjust
the level. If you use the AUTO SENS function (p. 46), the input sensitivity will be automatically set to
the optimal point, and a recommended setting for the input level will also be displayed.
Using the internal mics
In a practice room, the instruments are typically placed around the edge of the room facing into
the center. In order to record all instruments at a good balance, place the mic in the center of the
room, at approximately table-top height to get the best sound. Placing the mic on the floor will
produce a muffled sound with excessive low frequencies; placing the mic at a high location will
fail to capture the lows, producing a thin sound.
Drums
Bass Amp
PA Speakers for Vocals
and Keyboard
MENU Item
REC MODE
REC SETUP
REC SOURCE
SENS INT MIC SENS
Place in the
middle
Guitar Amp
R-26
Setting
2 CHANNEL
INTERNAL
LOW
Recording
57