Table of Contents
Advertisement
1-3. Adjusting the timing of main shaft and hook driving shaft
Refer
to"III-1-3. Adjusting the timing of main shaft and hook driving shaft" p.105
Instruction Manual for the AMS-224EN.
1-4. Adjusting the vertical stroke of the intermediate presser
Refer to
"III-1-5. Adjusting the vertical stroke of the intermediate presser" p.106
Instruction Manual for the AMS-224EN.
1-5. The moving knife and counter knife
Refer to
"III-1-6. The moving knife and counter knife" p.106
the AMS-224EN.
1-6. Needle thread clamp device
Refer to
"III-1-7. Needle thread clamp device" p.107
224EN.
* The thread clamp device has been factory-set to OFF at the time of shipment. Leave it in
the OFF state when using the sewing machine.
1-7. Thread breakage detector plate
Refer
to"III-1-8. Thread breakage detector plate" p.107
AMS-224EN.
1-8. Draining waste oil
Refer to
"III-1-9. Draining waste oil" p.108
in the Instruction Manual for
in the Instruction Manual for the AMS-
in the Instruction Manual for the
in the Instruction Manual for the AMS-224EN.
– 14 –
in the
in the
Advertisement
Table of Contents
