JUKI HZL-30Z Service Manual page 7

6. Front panel
7. Remove front panel and rear panel from frame.
There are hooking sections on the rear sides of both front and rear panel as illustrated in
the figures below. They are "engaging with the frame holes" and "engaging with the
respective covers".
mark section
Rear panel
Rear panel
Loosen setscrew (front) (18) in the front panel (Mas. asm.),
setscrew (right) (19) in the front panel main unit and
setscrew (bobbin winder) (20) in the front panel main unit after
removing the thread spool cover.
Draw out pattern dial (21) knob.
Front panel
Front panel
(18)
(19)
mark section
Rear panel
Rear panel
-5- -5- -5- -5- -5-
(20)
(21)
Front panel
Front panel