Attaching The Embroidery Hoop To The Machine - Janome MC 200E Instruction Book

1 2
3
r
5 6
e
w
w
w
q
4
w
r
t
e

Attaching the embroidery hoop to the machine

To attach
z Raise the presser foot.
x Place the prepared hoop on the machine.
Position the hoop by aligning the notches of the hoop
with the carriage pins.
q Notch
w Carriage pin
e Carriage
c Shift the lever in the direction of the arrow.
r Attach the hoop by pushing it against the carriage
pins.
r Lever
v Release the lever to lock the hoop in place.
To remove
b Raise the presser foot.
n Shift the lever in the direction of the arrow and remove
the hoop.
r Lever
CAUTION:
• Be careful not to place the excess of fabric between
the carriage and machine body t.
• Never try to move the carriage by hand or touch the
carriage while it is moving.
23