ShoreTel 560 Quick Install Manual page 6

2b Connect to power & network
(Non-powered Ethernet network requires AC power adapter)
c
Connect the AC
power cable
between the
adapter and an
electrical socket.
Upper LED*** lights
green to indicate when
phone is connected and
using power.
a
Connect a network cable to
the DATA & POWER OUT
port * on the adapter. The
other end goes to the LAN
port on the phone.
*
ON SOME ADAPTERS, THIS PORT MAY
BE LABELED "DATA & PWR" OR "PHONE."
**
ON SOME ADAPTERS, THIS PORT MAY BE
LABELED "DATA" OR "NETWORK."
***
SOME ADAPTERS MAY HAVE ONLY ONE LED.
6
Lower LED
lights green to
indicate adapter
has AC power.
b
Connect the second network
cable to the DATA IN port**
on the adapter and an
Ethernet jack in the
workspace (or on a data
switch/router).
optional
Share a single LAN wall jack between
your IP phone and computer by daisy-
chaining the PC off the second
Ethernet port on your phone. (The
phone connects to the wall jack and
the PC connects to the phone.)