ShoreTel 230 Quick Install Manual page 5

2a Connect to powered network
(no AC adapter required)
If the LAN supports power-over-Ethernet, no AC adapter is needed. The phone
draws power from the Ethernet network.
Connect the network
cable between the
LAN port on the back
of the phone and an
Ethernet jack in the
workspace (or on a
data switch/router that
supports Power-over-
Ethernet).
Share a single LAN wall jack
between your IP phone and
computer by daisy-chaining the PC
off the second Ethernet port on
your phone. (The phone connects
to the wall jack and the PC
connects to the phone.)
optional
5