Maintenance And Care - ION OMNI SCAN Quick Start Manual

MAINTENANCE & CARE
We recommend cleaning your film before inserting it into the
scanner so dust or dirt does not mar the image. If you do not
have the materials to do this properly, consult a professional
film store.
We recommend using a clean, dry cotton swab to clean the
glass surface inside the FILM HOLDER SLOT periodically.
When OMNI SCAN is left unused for a long period of time,
disconnect the USB cable.
When connecting OMNI SCAN to your computer, try
connecting it to a USB port on your computer's rear panel.
If you have too many other USB devices connected to your
computer (or if OMNI SCAN is connected to a USB hub), there may not be enough power for OMNI SCAN
to operate properly.
OVERVIEW
1. POWER button
2. ENTER button
3. UP/MIRROR button
4. DOWN/FLIP button
5. SCAN/HOME button
6. Film Feeder Wheel
7. Film Holder Slot
8. Display
9. USB Port
10. SD Card Slot
Note: Insert your SD card with the label facing down into the SD CARD SLOT. To eject your SD card from the
SD CARD SLOT, push it in first, then pull it out of the slot.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
BOX CONTENTS:
OMNI SCAN
Single Frame Holder
Strip Film Guide
Film Retrieval Strip
USB Cable
USB Power Adapter
Quickstart Guide
Safety Information & Warranty
3
Booklet