HOW TO TIE A USER TO A PHONE
At this point, you should have successfully associated the button box with an
IP phone. If you have not already done so, you may want to associate a user
with that same IP phone to ensure that the correct person has access to the
new button box. To assign a user to the phone using ShoreWare Director,
follow the procedure below:
Step 1
Step 2
Figure 3
Select the MAC address of the parent phone
8
Click on the Individual Users link to display a list of users
on this system.
From the list of names that appears in the left-most column,
click on the name of the user who will be associated with the
IP phone that will act as the "parent" of the button box.