Q-See H.264 NETWORK DVR User Manual page 16

QT518
FRONT PANEL
1 2
ITEM NAME FUNCTION
1 POWER ( Puts the DVR into standby mode or wakes it up from
Behind flip-down
standby mode.
panel)
2 USB PORT Used for external USB backup devices.
(
Behind flip-down panel)
Enter channel numbers.
3 NUMBER PAD
4 MENU Opens the Main Menu
5 BACKUP Opens Backup Menu
6 DIRECTION Navigates through selections in menus
7 RECORD Begins manually recording on all channels
8 Enters Search Mode
SEARCH
INDICATOR LIGHTS Shows status of the DVR Functions and the Hard
9
Drive
10 Change between 1, 4, and 8-screen viewing mode
VIEWING MODE
Input channels numbers above 10 by pushing this
11 10+ BUTTON
button followed by the second digit.
12 Enter PTZ mode in live view
PTZ
Turn audio on or off in live view if audio input devices
13 AUDIO
are attached.
14 Displays system information
INFO
Confirms selection in menus or input in fields
15 ENTER
REW - Rewind
16 PLAYBACK CONTROLS
PLAY - Opens the Playback interface. Pauses or
resumes playback
FF - Fast Forward
STOP - Quits Playback mode
Outer ring navigates through menus
17 CONTROL KNOB
Inner knob increases or decreases speed of fast
forward or rewind.
30
3 4 5 6 7 8
10 11 12 13 14 15 16 17
Also switches video output mode.
BACK PANEL
9 1
6
16
ITEM NAME
1 VIDEO OUT
2 HDMI
3 VIDEO IN
4 eSATA
5 LOOP OUT
6
SPOT OUT
7 AUDIO OUT
8 MICROPHONE IN
9 VGA PORT
10
USB PORT
11 LAN
12 AUDIO IN
13 ALARM IN
14 ALARM OUT
15 PTZ
16 K/B
17 POWER SOCKET
18 POWER SWITCH
19 FAN
2 3
7 8 9 10 11 12 13 14 15
FUNCTION
BNC connector for TV or monitor
HDMI video output
BNC connectors for up to 8 cameras
Connection for external eSATA hard drive for backup
Output each channel to a separate monitor
Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
Audio output for amplified speaker
Connect a microphone for two-way audio
VGA output for 19" or larger monitor
For the USB mouse
Network (ethernet) port
8 channels of audio input
Connect up to 8 external sensors
4 Channel relay output for external alarms
Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
Connector for a PTZ keyboard
Attachment point for power cord
Use to turn on the DVR as well as to turn off after
powering down from within the GUI
Cooling fan exhaust port. This should not be blocked.
4 5
16 17 18 19
31