HP Pavilion g7 Maintenance And Service Manual page 102

Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Release the wireless antenna cables (2) from the clips and the opening in the base enclosure.
CAUTION:
support the display assembly can result in damage to the display assembly and other
computer components.
3. Remove the three Phillips PM2.5×6.0 screws (3) that secure the display assembly to the computer.
4. Remove the display assembly (4).
94 Chapter 4 Removal and replacement procedures
Support the display assembly when removing the following screws. Failure to