Operations Manager Interface Configuration - HP Data Protector A.06.11 User Manual

E-mail "Reply To" Address—used if anyone replies to an e-mail sent by the noti-
•
fication system.
• E-mail SMTP Gateways—a list of one or more SMTP Gateway Servers with their
network addresses. At least one gateway is required, because it forwards e-mails
from Media Operations to defined users. If you define several gateways, the
connection is performed in the order stated in the list, until there is a response or
there are no gateways available.

Operations Manager interface configuration

Prerequisite
To use Operations Manager notification, Media Operations Server must be already
configured to use Operations Manager.
Configure the following Operations Manager interface options to enable Operations
Manager notification:
Operations Manager opcmsg.exe Location—type the path to the opcmsg.exe
•
utility, which is used to send notifications to Operations Manager. Click Browse
to locate the directory containing the utility.
NOTE:
If in the earlier installation of Media Operations the path length of the Operations
Manager file was greater than 80 characters, reselect the path after upgrading
to Media Operations A.06.11.
Operations Manager Default Application—type an application name (such as
•
MediaOps) that will be displayed in Operations Manager for any notifications
sent from this Media Operations Server.
Operations Manager Default Message Group—type a message group name that
•
will be displayed in Operations Manager for any notifications sent from this
Media Operations Server. You can override this default message group when
defining each Operations Manager notification trigger.
• Operations Manager Message Prefix String—type a string to prefix every Opera-
tions Manager notification sent from this Media Operations Server.
132 Status and reporting interfaces