HP D7522A 10/100 3Com 3C905C-TX Installation Manual page 5

HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
In order to operate the Remote Wake-Up and Remote Power-On
features correctly, the network card needs to interact with the
power management solution used by your PC and operating system.
Generally, recent PCs will support two different implementations of
power management, APM and ACPI. Your network interface card
will work with either power management solution but support for
Remote Wake-Up and Remote Power-On is dependent on the
operating system and, in some cases, the version of the operating
system you are using.
Operating Power Management
System
Windows 95 APM
Windows 98 APM
ACPI
Windows 98 APM
Second Edition
ACPI
Windows NT 4.0 None
1. By default, Remote Wake-Up is disabled.
Manageability and DMI
The DMI Component Code for your network interface card enables
DMI instrumentation for asset management, local and remote client
administration. This means that your card's configuration status can
be viewed and modified using a standard DMI browser such as HP
TopTools.
For more information and to download the DMI Component Code
for your network card, go to the following HP web site:
Solution
Yes
Yes
No
Not Supported
Yes
No Standby Mode
www.hp.com/go/toptools
Installation Requirements
Remote Wake-Up
Support
Yes
Yes
Yes
Not Supported
1
No
Yes
Remote Power-On
Support
English 5