Restoring The Data Protector Cell Manager Specifics; Making Idb Consistent (All Methods) - HP Data Protector A.06.11 Recovery Manual

1. Set up the MNS cluster and install a Data Protector client in it.
Note that it is not possible to install a Cell Manager on a MNS cluster, it is not
supported.
2. Perform a filesystem backup, configuration backup, and an IDB backpup.
3. Create an ASR disk set.
Refer to online Help, index keyword "Automated System Recovery" for instructions
on how to prepare for ASR, preparation to create an ASR set, recovery using
ASR.
4. Perform Disaster Recovery on the node.
Refer to online Help, index keyword "disaster recovery" for detailed instructions
on how to prepare for disaster recovery and so on.
The node is recovered and can join the cluster.

Restoring the Data Protector Cell Manager specifics

This section explains additional steps for particular methods that should be performed
when restoring Windows Cell Manager.

Making IDB consistent (all methods)

The procedure described in this section should only be used after you have performed
the general disaster recovery procedure.
To make the IDB consistent, import the medium with the last backup so that the
information about the backed up objects is imported to the database. In order to do
so, perform the following steps:
Disaster recovery guide 103