Srcipaddr, Srcipport - HP NonStop SSL Reference Manual

SOCKSUSER socksuser
Arguments
sockshost
the hostname or IP address of the host running the SOCKS-Version 4 enabled firewall. A value of * indicates that
the SOCKS protocol will not be used.
socksport
the listening port of the host running the SOCKS-Version 4 enabled firewall.
socksuser
the SOCKS user name to be used to authenticate against the SOCKS server.
Default
If omitted, HP NonStop SSL will use a value of * for SOCKSHOST meaning the SOCKS protocol will not be used.
Example
SOCKSHOST 172.3.5.99
SOCKSPORT 1911
SOCKSUSER sockstest
Considerations
•
In run mode PROXYC the value of TARGETPORT will still be required to determine the final host to connect
to.
•
In run modes FTPC the final host to connect to will be configured by adding it to the user name just as when not
using SOCKS.

SRCIPADDR, SRCIPPORT

Use these parameters to for the configuration of an HP NonStop SSL EXPANDS process.
Parameter Syntax
SRCIPADDR ip-address
SRCIPPORT port
Arguments
ip-address
specifies the IP address of the local end of the EXPAND line.
port
specifies the port number of the local end of the EXPAND line.
Example
SRCIPADDR 10.0.0.12; SRCIPPORT 1202
SRCIPADDR 2001:db9::1421:51ab ; SRCIPPORT 1202
Considerations
•
The parameters should be set exactly to the original equivalent parameter values of the EXPAND line handler,
as shown by the SCF INFO LINE DETAIL command.
•
The parameters are ignored with any run mode other than EXPANDS.
74 • Configuration
HP NonStop SSL Reference Manual