HP NonStop SSL Reference Manual page 121

This warning indicates that the parameter PREVENT_TLS_1_0_CBC_VULNERABILITY was set to FALSE by
the user, which results in not preventing a certain vulnerability on CBC algorithms, known as the BEAST attack.
Changing the default value TRUE of the parameter should only be done if advised to by support.
Invalid value ("<value>") given for parameter TARGETHOST. Override will not be enabled (<detailed
reason>)
This warning indicates that an invalid value for TARGETHOST was specified in FTPC mode. Accordingly the
targethost override (in case no targethost was given) in the FTPC user command will not work. Please see <detailed
reason> for error details and parameter description of TARGETHOST and TARGETHOSTFORCE.
TARGETPORT out of valid range (1-65536). Override will not be enabled
This message indicates that a TARGETPORT was specified in FTPC mode that is out of the valid port range of 1-
65536. Please see parameter description of TARGETPORT and TARGETPORTFORCE.
could not connect to FTP server data port
This message indicates that the connection to the data port which the FTP server opened up could not be established.
Watch for other message which come along with this one in order to determine the reason for the connect failure. If
you see this warning, please contact HP support.
Could not build proxy for passive data connection from client
This warning indicates than the request of an FTP client for a passive data connection could not be successfully
fulfilled due to problems setting up the proxy for the passive data connection. Watch for other message which come
along with this one in order to determine the reason of the error condition.
unexpected AUTH SSL reply: '<reply>'
This warning indicates that the FTP server sent an unexpected reply to the AUTH SSL command. Please contact HP
support.
reply to EPRT command from FTP server has error: '<detailed reason>'
This warning indicates that the FTP server sent an unexpected reply to the ERPT command. Please contact HP
support.
Failed to change IP address according to given value <hostaddress> of parameter FTPNATADDRESS:
<detailed error reason>
This warning indicates that an invalid value for the parameter FTPNATADDRESS was specified. See <detailed
error reason> for why the error occurred and to resolve the error condition.
could not listen on socket on IP <ip>, port <port>, error: '<errorstring>'(errno=<error_number>)
This warning is issued when the attempt to set up a listen on IP <ip> and port <port> failed. Please see the error
number and the corresponding error description indicating the reason for the error condition.
could not create listening socket on port <port>, error: '<errorstring>'(errno=<error_number>
This warning is issued when the attempt to create a socket listening on port <port> failed. Please see the error
number and the corresponding error description indicating the reason for the error condition.
illegal USER command sent from remote
This warning is issued when an incorrect USER command was received in FTPS mode. Please contact HP support.
Incorrect user command while trying to change to FTPC format: <detailed error>
This warning is issued when PASSREMOTEIP is set to TRUE and an attempt to change the USER message to
FTPC format failed. Please contact HP support.
receiving message on $RECEIVE without prior open message - ignoring and replying with length 0
HP NonStop SSL Reference Manual
Appendix • 121