Logmemory; Maxsessions - HP NonStop SSL Reference Manual

Arguments
length
a number representing the maximum log file length in kilobytes in the range of 100 to 40000 (~40MB).
Default
The default length is 20000.
Considerations
•
After the current file reaches the maximum size a log rollover will occur. Please see section
Rollover" in chapter "Monitoring" for details on logfile rollover.
See also
LOGFILE, LOGFILERETENTION

LOGMEMORY

Use this parameter to have HP NonStop SSL log memory usage information output in regular intervals.
Parameter Syntax
LOGMEMORY number_of_io's
Arguments
number_of_io's
a number representing after how many I/O operations HP NonStop SSL will send its memory usage to the log output
Default
The default is 0 meaning that memory usage will not be logged
Considerations
•
Use to have an easy correlation between memory usage of HP NonStop SSL and events in the log output. Do
not use if memory usage of HP NonStop SSL is not of interest for you.
•
The parameter can be changed at run time using SSLCOM, please see chapter
for details.

MAXSESSIONS

Use this parameter to limit the number of concurrent connections in run modes TELNETS, PROXYS, PROXYC and
PROXY.
Parameter Syntax
MAXSESSIONS max
Arguments
max
the number of allowed concurrent sessions or 0 for unlimited.
Default
If omitted, HP NonStop SSL will use a value of 0 (no limits).
Example
66 • Configuration
"Logfile/Auditfile
"SSLCOM Command
HP NonStop SSL Reference Manual
Interface"