Faulty Dispenser - Hoshizaki DCM-240BAF Service Manual

3. FAULTY DISPENSER

PROBLEM
a) Storage Bin
[1] No ice is
dispensed.
b) Agitator
c) Solenoid
d) Ice Switch or Dis-
pensing Switch
e) Ice Dispensing Relay
a) Water Valve (Dis-
[2] No water is
pensing)
dispensed.
b) Water Switch or
Dispensing Switch
[3] Ice keeps a) Shutter
being dis-
pensed.
b) Ice Switch and
Dispensing Switch
POSSIBLE CAUSE
1) Ice block or bridge
1) Deformed due to ice block
or bridge.
1) Coil winding opened.
1) Bad contacts.
1) Bad contacts.
1) Clogged Filter.
1) Bad contacts.
1) Faulty adjustment.
1) Contacts fused.
26
REMEDY
1) Remove all ice from
Storage Bin when not
using ice dispenser for a
long time.
1) Replace.
1) Replace.
1) Check for continuity and
replace.
1) Check for continuity and
replace.
1) Clean.
1) Check for continuity and
replace.
1) With Shutter closed, lock
Shutter in place by
securing with two screws
at the lower part of
Solenoid and two screws
under Solenoid.
1) Replace.
A2AAA0269806