Basic Operation; Operation Of Remote Control; Remote Control Batteries Installation; Turning On/Off Lcd Tv - Sanyo LCE-24C100F(K) Instruction Manual

BASIC OPERATION

OPERATION OF REMOTE CONTROL

INPUT button
INFO /
SPORTS button
TIMER button
NUMERIC buttons
CHANNEL UP/DOWN buttons
CHANNEL RECALL button
DIGIT button
MENU button
▲/
POINT

REMOTE CONTROL BATTERIES INSTALLATION

1
Remove the battery compartment cover.
Insert two size AA batteries (1.5V) according to "+" and "-" polarity markings inside
2
the battery compartment.
3
Close the battery compartment cover.
Note:
Do not expose batteries (battery pack or batteries installed) to excessive heat such
as sunshine, fire or the like.
TURNING ON / OFF LCD TV
1
Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING
LCD TV".)
2
Connect LCD TV's AC Power Cord into an AC outlet.
3
Press POWER ON/OFF button on Side Controls of LCD TV or on
Remote Control to turn it ON. The POWER indicator will light up
(green). Press POWER ON/OFF button again to shift it to stand-by
status, the POWER indicator will become red.
NO SIGNAL SHUT OFF
This TV set incorporates the NO SIGNAL SHUT OFF function.
If no signal is input in TV mode, "OFF 00:10" will display for about 10 minutes and TV will be
turned off automatically.
8
A·B button
/ /►
▼ ◄
buttons
POWER ON/OFF button
SOUND button
PICTURE button
WIDE button
VOLUME +/- buttons
MUTE button
BACK button
ENTER button
SIDE CONTROL
POWER ON/ OFF
button
REMOTE CONTROL
POWER ON/
OFF button