IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ● Using cabinets or stands recommended by the manufacturer of the television. ●...
SAFETY INSTRUCTIONS Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time.
Compatibilty contrast ratio and wide viewing angle. ● VIZON Engine ● Full Multi System VIZON Engine, SANYO High Quality Image Processing PAL, SECAM, NTSC, NTSC 4.43 system can be connected. Technology reproduces clear, dynamic, natural and realistic ● HD-Ready picture along with FHD LCD Panel Technology.
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Control Infrared Power/Timer Remote Indicator Receiver CARE FOR USING LCD TV ● Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. ● There may be some tiny black points and/or bright points on the SCREEN. These points are normal. SIDE CONTROL POWER ON/ OFF button -Used to turn the LCD TV on or off.
CONNECTING LCD TV INSTALLING & UNINSTALLING STAND BASE Please according to the following procedure to install stand. Be careful of the panel. Suggest to put down the panel side on the cushion or other soft material before installing the stand. To align the corresponding pilot holes and fix the stand by screws.
CONNECTING LCD TV CONNECTING A COMPUTER Cables used for connection (These cables are not NOTE: supplied with this LCD TV.) When connecting the cables, AC Power Cords ● PC/VGA Cable (D-SUB 15pin) of both LCD TV and external equipment should ●...
BASIC OPERATION PLUG & PLAY By PLUG & PLAY, when the TV reset and powered on for the first time, it will automatically search and preset all the receivable TV programs. I AM SEARCHING ALL PROGRAMMES PLEASE WAIT! Plug the power, connect the antenna, and press Main Power ON/OFF button, the TV set will automatically search the programs.
BASIC OPERATION INFO Press INFO button on Remote Control to display the status of LCD TV. Press again to remove the display. Channel Colour System AUTO Sound System MONO STEREO/MONO VOLUME CONTROL To adjust the volume value desired by pressing VOLUME(+/-) buttons on Remote Control or on Side REMOTE CONTROL Control.
MENU OPERATION ZOOM[CAPTION-In]: Provides the image that is expanded as "ZOOM" mode and moved up to show more image to include captions. This function can be used for enjoying a letter box picture with captions. NORMAL: Provides real 4 : 3 image on 16 : 9 screen. CHANNEL Press MENU button and the main menu will appear.
MENU OPERATION COLOUR SYSTEM The setting for colour system is only active in TV or AV mode. Usually, the colour system is set to the position of "AUTO". In case of abnormal colour, repeatedly press POINT ◄► buttons to select "AUTO", "PAL", "SECAM", "NTSC"...
MENU OPERATION LANGUAGE: Press POINT ◄► buttons to choose ENGLISH, THAILAND, VIETNAM, or INDONESIA. For Middle East destination, it will be displayed: ENGLISH, ARABIC or PERSIAN. H-POSITION: OSD moves to the left side when POINT ◄ button is pressed. OSD moves to the right side when POINT ►...
DEALER MODE AUTO ADJUST: Press POINT ◄► buttons, and the TV automatically detects incoming signal, and adjust itself to optimize its performance. If the image is not displayed properly, a manual adjustment is required (Refer to following adjustments). SETUP H-POSITION: The horizontal picture position will be moved to the left side by pressing POINT ◄ CHILD LOCK button.
DEALER MODE MUSIC MODE SETUP DEALER MODE MUSIC mode is used to block picture on channel program.Use this feature to set Music Mode condition in set 5 Position Channel. VOLUME LOCK TUNING LOCK Press and hold Menu button on Side Controls, and press INFO button on remote control to START MODE display Dealer mode menu.
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV". 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3.
APPENDIX TECHNICAL SPECIFICATIONS Model LCE-24C100F(K)/(N)/(R)/(S) Maximum Visible Range 61cm (Screen Diagonal Size) Picture Resolution 1920(H) x 1080(V) Voltage AC110-240V 50/60Hz Power Consumption LCE-24C100F(K)/(N)/(R)/(S): 44W Power Management VESA DPMS Colour System PAL/SECAM/NTSC/NTSC4.43 Sound System D/K, I, M, B/G Channel Coverage - VHF: E2-E12, R1-R12, K1-K9, J1-J12, A2-A13 - UHF: 21-69, A14-A69, J13-J62 - CATV: S1-S41, X, Y, Z, Z+1, Z+2 Aerial input impedance...
APPENDIX SIGNAL MODE COLUMN (Recommended) This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV can automatically recognize the signal from the connected PC( computer)/ HDMI. PC SIGNAL MODE COLUMN (recommended) Note: ● In case LCD TV can not display properly due to the connecting cable or the graphic hardware, please make adjustments about phase, clock and so on.
Page 20
SANYO Electric Co., Ltd. Part No: 1AA6P1P5969-- Z5YJ ( UE7-D ) Printed in Indonesia...