Sanyo SAP-KRV9AG Instruction Manual page 13

3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.5 SLEEP Operation
3.5.1 In Cooling and
DRY Modes:
( and )
3.5.2 In Heating
Mode: ( )
** (Only for Heatpump Models) **
12
SLEEP Mode is used for saving energy.
Press the SLEEP button while operation is on.
The mark appea rs in the display.
To release the SLEEP function, press the SLEEP button again.
When the SLEEP mode is selecte d, the air conditioner automatically raises
the temperature setting 1°C when 1 hour has passed after the selection was
made, and then another 1°C after another 1 hour have passed, regardless
of the indoor temperature when SLEEP was selected. The unit will maintain
this temperature. This enables you to save energy without sacr
comfort. This function is convenient when gentle cooling is needed.
Setting
temperature
1°C
Press the
SLEEP button
When the SLEEP mode is selecte d, the air conditioner automatically lowers
the temperature setting 1°C when 1 hour has passed after the selection was
made, and then another 1°C after another 1 hour have passed, regardless
of the indoor temperature when SLEEP was selected. The unit will maintain
this temperature. This enables you to save energy without sacr
comfort. This function is convenient when gentle heating is needed.
Setting
temperature
Press the 1 hour
SLEEP button
1°C
1 hour 1 hour
Time
1°C
1°C
1 hour Time
ing
ing