Set Up A Windows Pc To Allow The Radio To Access Your Audio Files Via A Upnp Server - Grace Digital GDI-IRBM20 User Manual

5. Press the SELECT button.
6. Turn the knob until 'Repeat' is displayed.
7. Press the SELECT button.
8. Turn the knob to select YES/NO to confirm that repeat mode should be enabled.
NOTE: 1. IF the shared folders contain more songs than the Internet Radio memory limit, it will
display "Too many files"
2. Repeatedly pressing button P4 will toggle Repeat and Shuffle modes
Set up a Windows PC to allow the radio to access your audio files via a
UPnP server
1. If your PC is running Microsoft Windows XP or Windows Vista, then you can use Windows Media Player 11 (WMP11) to act as your UPnP
(Universal Plug and Play) media server 1.0. Windows Media Player 11 may be downloaded from Microsoft's website and installed by
following the instructions detailed in its installation wizard.
2. Once installed, Windows Media Player 11 will create a library from all the media files available to it on your PC. To add new media files to the
library, select 'File > Add to Library... > Advanced Options', click 'Add' and choose the files you wish to add and click 'OK'.
3. You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the radio to access your media
library. In order to this, you will need to do the following:
a. Keep pressing BACK to get to the radio's top-level menu and then turn the rotary knob to select 'Media Player'.
b. Press SELECT and then turn the knob to highlight 'UPnP Servers'.
c. Press SELECT and the radio will scan for all available UPnP servers. Note, this may take a few seconds for the radio to complete its scan
and before the scan has completed, the radio will display '*Empty+'. The radio will continue to display '*Empty+' if no UPnP servers are
found.
d. After a successful scan, select your UPnP server, by rotating the knob if there is more than one UPnP server, and then press SELECT
(note, your radio will display 'Access Denied' at this stage).
4. Your PC will now prompt you that a device has attempted to connect to your UPnP server. In order to allow the radio to have access to the
media files, you will need to click the 'Library' tab from Windows Media Player 11 and select the 'Media Sharing...' item to open the 'Media
Sharing' window.
Selecting 'Media Sharing...' for Windows Media Player 11:
-
28 -