Setting The Alarm - Grace Digital GDI-IRBM20 User Manual

< Set Time/Date
Set Alarm
6. Press the 'Select' knob.
7. Turn the knob until the correct time zone is seen on the display. Push the 'Select' knob to set your time zone. Then turn the Menu knob
until the hour setting is correct, then press the 'Select' knob.
8. Turn the knob until the minute setting is correct, then press the 'Select' button.
The display shows <Set Time> with the new time shown beneath for 3 seconds, then returns to the menu, press the 'Back' button 2 times to go
to the main menu. The radio will now keeps time based on information it receives from the internet.

Setting the alarm

1. Press the 'Select' button.
NOTE: IF you make a mistake at any point, press the BACK button to go back to the previous screen
2. Turn the knob until the display shows <Alarm Clock>
3. Press the 'Select' button.
4. Turn the knob until the display shows <Set Alarm>
-
19 -
>
DST
Pacific
Central
Eastern
Set Time
1:30 PM
Set Time
1:34 PM
Stations
< Alarm Clock
Media Player
>