Step 3 - Connect To The Wireless Network - Grace Digital GDI-IRBM20 User Manual

When the GDI-IRBM20 finds your wireless network, the display will show the SSID (the name of your home wireless network) - this is the name
ascribed to your Wi-Fi router by the person who set up your network - for example:
It is possible, and in some locations likely, that your radio will find more than one wireless network, in which case you can choose the wireless
(Wi-Fi) network you want to connect to. Turn the dial on your radio until the name of the wireless network has brackets {} next to the name of
the network you want to connect to.
For optimal performance you may want to check your home network settings to make sure your radio is on a deferent channel than your
neighbors. To do this please consult your Wi-Fi router owner's manual.

Step 3 - Connect to the wireless network

When the SSID for the Wi-Fi router you want to connect to is displayed on the screen, press the large dial inward.
IF your network is not configured to require an encryption code, the screen should display:
then:
IF the screen displays either WEP or WPA, a password is required:
OR
Then the network is using one of the encryption systems: Wired Equivalent Privacy (WEP) or WiFi Protected Access (WPA or WPA2). You
therefore need to enter the correct WEP or WPA password on your GDI-IRBM20 radio to communicate with your network. Please note that the
GDI-IRBM20 does not currently support WPA2 Business.
Only the person who set up the network in the first place knows this password; if that person is not you then you need to find out the
password. You can do this by checking with the Customer Service of your internet provider or the manufacturer of your wireless router.
After approximately 3 seconds, the display goes into the password entry mode:
< END ◄ ►
A
To enter the password, use the SCROLL to select each letter/number/symbol of the password in turn. When the 1
password is in the center of the display, press the large dial inward to select that letter or number. Repeat this process for each letter or
number in your password.
NOTE: WEP and WPA passwords are upper and lower case sensitive and MUST be entered exactly
-
14 -
< My Home Network >
Connecting to
Network
Network OK
Enter WEP key
Enter WPA key
BCDEF>
█
st
letter or number of your