Dimensions And Specifications, Models S,Su & Ss684; Exterior Dimensions; Oven Interior Dimensions - Garland S680 SERIES Installation And Service Manual

DIMENSIONS AND SPECIFICATIONS, MODELS S,SU & SS684
Model
S684*
SS/SU684**
SS/SU684RC2***
Salamander
Broiler****
*(All purpose tubular elements) **(Sealed -top elements, Model # SS684 in North America) *** Maximum on any 684 series range .
****Add when wired to range base (SER/SUER-680) *****Note: For 208V/1phase the salamander cannot be wired into the range .

Exterior Dimensions

Height
47" (1194mm)
With Front Rail Note: Shipping Cubic Feet is 84 .5 .
†
Ratings:
Tubular Elements - Small 6-1/2" (165mm) - 1250 Watts . Large 8-1/2" (216mm) - 2100 Watts
Sealed Elements - Small 7" (180mm) - 2000 Watts . Large 8-5/8" (220mm) - 2600 Watts
Hot Plate - (per 12"/305mm section) - Front and Rear sections each 1675 Watts, (3350 Watts total)
Griddle - (per 12"/305mm section) - 3350 Watts
Standard Oven - 4 .85 kW
Convection Oven - 5 .0 kW (plus 0 .5kW fan motor, for 5 .5kW total)
NOTE: Many local codes exist, and it is the responsibility of the Owner
and the Installer to comply with those codes .
7-1/2"
[190mm]
34-1/4"
[870mm]
41"
[1041mm]
Page 4
Total Kw
Load
208V/1Ph 208V/3 Ph 240V/1Ph 240V/3 Ph 400 V/3N
27 127
33 157
34 N/A
7 N/A*****
Width Depth
60" (1524mm) 34-1/4" (870mm)
REAR CABLE
ENTRANCE
60"
[1524mm]
Nominal Amps
76 110
97 136
100 142
23 29

Oven Interior Dimensions

†
Height
13-1/2" (343mm)
3-1/2"
[829mm]
NOTE: For ranges with convection oven(s), (models with
suffix `RC' or `RC2'), air circulation is required for proper
operation of fan motors . These models must not be dais
mounted or installed without legs .
24-1/2"
[622mm]
6"
[152mm]
OPTIONAL
HIGH SHELF
9-1/4"
[235mm]
31-3/4"
[806mm]
6"
[152mm]
15-1/4"
[387mm]
66 —
84 60
87 60
20 4
Width
26-1/4" (667mm) 22" (559mm)
Installation
Side
Clearances:
Range w/o
3" (76mm)
Salamander
Range w/
7" (178mm)
Salamander
10"
Hot Plate
(254mm)
13-5/8"
[346mm]
4-3/4"
[121 mm]
W/OPTIONAL
RC MOTOR
3"
REAR CABLE [76mm]
ENTRANCE
29"
[737mm]
Part # P152 Rev 1 (01/13/10)
415V/3N
—
58
58
4
Depth
Back
2" (51mm)
2" (51mm)
—
57-5/8"
[1465mm]