Installing Ac Outlet Box (2U) - Fujitsu Eternus DX60 User Manual

Chapter 5 Installation
5.2 Rack Installation
5-2
5.2.4

Installing AC Outlet Box (2U)

This section describes how to install the 2U AC outlet box in a rack.
- Attachment procedure
M5 cage nut
Clip the cage nut tabs into the desired
hole from the inside.
Side view
M5 cage nut
Rack pillar (square)
Attach the blank panel to the rack pillars using two black M5 screws.
AC outlet box
(Rear rack pillars)
Do Not
CAUTION
• AC outlet box cannot be connected to the device other than
ETERNUS DX60/DX80/DX90.
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED
M5 rack nut
Clip the rack nut over the desired
hole from the side.
M5 Rack nut
Rack pillar (round)
M5 screw
Blank panel
(Front rack pillars)
103
M5 screw
End of procedure
P3AM-3042-08ENZ0