Fujitsu MVGA-NVG11A User Manual page 27

Q: I can't get my system to work with AGP4X. It only can work in
AGP2X.
A: 1. You must enable AGP in 4X mode in BIOS of motherboard.
2. You need to confirm motherboard have support AGP 4X mode.
3. You need to enable AGP in 4X mode during install VIA 4-in-1 procedure.
Q: I have 2 jumpers on my VGA card, what for they are? How can I set
this jumpers?
A: 1. They are for TV-OUT function in DOS mode.
2. JP1/JP2 Short 1-2 for NTSC ,JP1/JP2 Short 2-3 for PAL.
23