Tv-Out Function Instructions - Fujitsu MVGA-NVG11A User Manual

3.5 TV-OUT Function Instructions

Before you power on your system, you have to be sure the VGA
NOTE: card is installed already and all the cables are connected to
prevent form the card get burnt.
3.5.1 How to enable the TV-OUT function
The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV
input. Connect the signal cable between TV-OUT at VGA card and
TV's Video input, and turn on the TV before launch ' Display
War ning:
Properties' window. Otherwise the TV-OUT function would be
gray and un-selectable.
1. Set the correct jumper at your VGA card for TV formats (PAL BG/NTSC... ).
2. Boot-up the system and display to monitor.
3. Connect the signal cable between TV-OUT at VGA card and TV' s Video input
and turn on the TV.
4. After launch 'Display Pr oper ties' window then:
A. Click 'Settings' tab
B. Click 'Advanced... '
C. Click 'Output Device'
tab
D. Select 'TV'
E. Click 'Change For mat...'
D
13
A
C
E
B