Software Installation; Installing Driver On Windows 98Se/Me; Installing Directx On Windows 98Se/Me - Fujitsu MVGA-NVG11A User Manual

3. Software Installation

After installing the VGA card in your computer, please turn on your PC, and your
computer will be automatically detected.

3.1 Installing driver on Windows 98SE/ME

Please set the VGA card as 'Standar d PCI Gr aphics Adapter (VGA)'. When asked
if you want to restart your PC, click '
1. Insert the Auto-Run CD-ROM driver (wait few seconds). You will see ' VGA
Installer ' window that will be shown on the screen. If it does not display, please
browse the CD and double click 'AutoRun.exe' icon.
2. Click-on 'Install Dr iver ' to install the VGA driver.
3. After the installation is complete, the system will ask you whether you want to
restart your computer now. Click 'Yes' to reboot your system and activate the
program.

3.2 Installing DirectX on Windows 98SE/ME

When the system restart after finishing the VGA driver setup, please install better
DirectX version than that on your system.
1. Double click CD-ROM icon to let it auto-run. The 'VGA Installer ' will be
shown again.
2. Click 'Install Dir ectX' and you will see a 'Installer ' dialog, and click 'OK' to
show next page.
3. Click 'Yes' to continue.
4. Click-on 'ReInstall Dir ectX' to install the DirectX program.
5. When it is done, please click 'OK' to reboot Windows.
No
'. Then you should follow the next step.
11