Power Wheels JEEP WRANGLER 78490 Owner's Manual page 11

5
Steering
Column
Bottom View
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• Turn the vehicle body on its side.
• Insert the straight end of the steering column up through
the hole in the vehicle body wall and out through the
hole in the dash.
6
Cap Nut
Bottom View
• Insert the end of the steering column through the hole in
the steering rod.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column, tap the cap nut
with a hammer to secure it on the steering column.
Helpful Hint! You may want the help of another person
to support the steering column while you tap the cap nut
with the hammer.
Assembly
Hole
End of Steering Column
Steering Rod
7
Steering
Column
"UP"
• Turn the vehicle body upright.
• Position the steering wheel so that the spokes form a
"Y" as shown. The tab on the steering wheel stem
should face up.
• Fit the steering wheel onto the steering column.
• Fit a cap nut onto the end of the steering column.
• Tap the cap nut with a hammer to secure it on the
steering column.
Helpful Hint! You may want the help of another person
to support the steering column while you tap the cap nut
with the hammer.
11
Steering Wheel
Tab
Cap Nut