Backgrounds <Bg - Polycom SIP 3.1 Administrator's Manual

Backgrounds <bg/>
Attribute
bg.hiRes.color.selection
bg.hiRes.color.pat.solid.x.
name
bg.hiRes.color.pat.solid.x.red
bg.hiRes.color.pat.solid.x.
green
bg.hiRes.color.pat.solid.x.blue
bg.hiRes.color.bm.x.name
bg.hiRes.color.bm.x.em.name
The backgrounds used by the SoundPoint IP 550, 560, 650, and 670 phones are
defined in this section. In the following table, w=1 to 3, x=1 to 6.
This configuration attribute is defined as follows:
Permitted
Values Default
w,x 1,1
any string
0 to 255
0 to 255
0 to 255
any string built-in
value of
any string
"Thistle"
Interpretation
Specify which type of background (w) and index
for that type (x) is selected on reboot where w=1
to 3, x=1 to 6.
Solid pattern name.
For x=1: Light Blue, x=2: Teal, x=3: Tan, x=4:Null
The screen background layouts.
For x=1, red (151), green, (207), blue (249)
For x=2, red (73), green (148), blue (148)
For x=3, red (245), green (157), blue (69)
For x=4, red (Null), green (Null), blue (Null)
Graphic files for display on the phone and
Expansion Module.
For x=1:
• name is "Leaf.jpg"
name is "LeafEM.jpg"
For x=2:
• name is "Sailboat.jpg"
name is "SailboatEM.jpg"
For x=3:
• name is "Beach.jpg"
name is "BeachEM.jpg"
For x=4:
• name is "Palm.jpg"
name is "PalmEM.jpg"
For x=5:
• name is "Jellyfish.jpg"
name is "JellyfishEM.jpg"
For x=6:
• name is "Mountain.jpg"
name is "MountainEM.jpg"
Note: If the file is missing or unavailable, the
built-in default solid pattern is displayed.
Configuration Files
A - 77