Advertisement
Field Verified
Parameter
Radio policy
Admin status
Session timeout
Quality of service
Blacklist timeout
DHCP required
DHCP server IP address
VLAN
Layer 2 security
MAC filtering
Layer 3 security
Web authentication
WEP key size *
Key index *
Encryption key *
Key format *
* These parameters are required if Static WEP is selected for Layer 2 security.
6
6. The following table shows additional settings for the
/
configuration. Navigate to this page by clicking the
Switch
General
tab at the top of the screen and
Switch
pane.
Parameter
Enable multicast support
7. Click the
button to save the changes
Apply
8. The following table shows additional settings for the
configuration. Navigate to this page by clicking the
the top of the page and then clicking the
you are using for the SpectraLink Wireless Telephones.
Setting
802.11b only
Checked
0 (zero)
Gold
60
As required by installation
As required by installation
As required by installation
Static WEP
Not checked
None
Not checked
40 or 104 bits
As required for installation
As required for installation
Hex
9. Click the
button to save the changes.
Apply
10. Click the
Save Configuration
to ensure the configuration is available across system restarts.
The Airespace Wireless Enterprise Platform is now ready for use with
SpectraLink Wireless Telephones. No restart of the system is required.
All parameters take effect when applied.
in the navigation
General
Setting
Criticality
Enabled
Required
button for the WLAN
Edit
Criticality
Recommended
Required
Required
Required
Recommended
Recommended
Recommended
Required
Required
Recommended
Recommended
Recommended
Recommended
link at the top of the browser window
PN: 1725-36047-001_G.doc
Configuration Guide
WLAN
tab at
WLAN
Advertisement
