Related Manuals for Cisco AS-2000
Summary of Contents for Cisco AS-2000
-
Page 1: Configuration Guide
Field Verified Configuration Guide Airespace Wireless Enterprise Platform – AireOS AS-2000 switch/controller with AP-10xx Access Point June 2008 Edition 1725-36047-001 Version G... -
Page 2: Trademark Information
Polycom personnel and customers. The LinkPlus drawings and specifications contained herein Link are the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior written approval of Polycom, nor be implied to... -
Page 3: Product Summary
Earlier and later software versions have not been validated except as noted. † * Telephone calls per AP must be configured in the system per documentation provided by Polycom. ** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are known interoperable at one or more customer sites with the WLAN hardware and software identified in the table. -
Page 4: Vlan Support
Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones. This document identifies issues and solutions based on Polycom’s extensive experience in enterprise-class Wi-Fi telephony, and provides recommendations for ensuring that a network environment is adequately optimized for use with SpectraLink 8020/8030 Wireless Telephones. -
Page 5: Access Point Configuration
Airespace Wireless Enterprise Platform—AireOS AS-2000 Switch Controller with AP10-xx Access Point Access Point Configuration 1. Connect to the Airespace switch or controller via Netscape or Internet Explorer by navigating to the URL http://<IP_Addr> (where <IP_Addr> is the IP address of the switch or controller). - Page 6 Field Verified Configuration Guide 6. The following table shows additional settings for the configuration. Navigate to this page by clicking the Switch General tab at the top of the screen and in the navigation Switch General pane. Parameter Setting Criticality Enable multicast support Enabled Required...