Chapter 3 Configuring The Wireless Ap; Association Table - Planet WAP-4030 User Manual

Chapter 3 Configuring the Wireless AP

Web configuration provides a user-friendly graphical user interface (web pages) to manage your
WAP-4030. An AP with an assigned IP address (e.g. http://192.168.0.1) will allow you to monitor and
configure via web browser (e.g., MS Internet Explorer or Netscape).
1. Open your web browser.
2. Enter WAP-4030 IP address (default IP address is http://192.168.0.1) into the address field of the web
browser. Please also make sure your PC's IP address is in the same IP range with WAP-4030.
3. A User name and Password dialog box will appear. Please enter your User name and Password here.
Default User name and Password is "admin". Click "OK".
4. Then you will see the WAP-4030 configuration web pages.
3.1

Association Table

In this screen, you can see the MAC addresses of the clients connect to this Access Point.
5