Error Messages - Pioneer S-DV440 Operating Instructions Manual

Additional information
Problem
Considerable noise in
radio broadcasts
(continued).
Auto tuning does not
pick up some stations.
Sound is mono only.

Error Messages

Message
Child Lock
Rec Mode On
Phones In
96k Stereo
No Surr. SP
Muting
Exit
SR+ Error
Remedy
• Connect an outdoor FM antenna (see Connecting external antennas on
page 52).
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 52).
• Turn off any other equipment that may be causing the noise or move it away
from the main unit.
• The tuning interval is incorrect for your country or region. Try switching the
tuning interval (frequency step) (see Frequency step setting on page 58).
• The radio signal is weak. Auto tuning will only detect radio stations with a
good signal. For more sensitive tuning, connect an outdoor antenna.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 22).
Description
• This message appears when the front panel buttons are pressed when the
child lock feature is active. See Child lock setting on page 57 for more on
switching on/off the child lock.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see Recording mode on page 53).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the MUTE button to turn the sound on).
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
• Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.
12
65
En