Getting Started; Switching On And Setting Up - Pioneer S-DV440 Operating Instructions Manual

03

Getting started

Chapter 3
Getting started

Switching on and setting up

After making sure everything is connected up
properly, you're ready to switch on. The first
thing to do is to tell the system what kind of TV
you're using, standard or widescreen.
After that you can set up the surround sound
for your room, and set the clock so that you can
use the timer features.
SURROUND
1 Press STANDBY/ON (on the remote or
the front panel) to switch the system on.
Also make sure that your TV is switched on and
that the video input is set to this system (for
example, if you connected this system to the
VIDEO 1 input on your TV, switch your TV to
VIDEO 1).
14
En
STANDBY/ON
CD FM/AM L1/L2
DVD TUNER TV LINE
FRONT
OPEN CLOSE
0
8
1 3 ¡
4 4
7
RETURN
DVD MENU
TUNE+
ST– ST+
ENTER
TUNE–
MUTE SOUND
MASTER
VOLUME
TV CONTROL
CH INPUT VOL
You should see the welcome screen displayed.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
2 Press ENTER to move on to the next
screen.
3 Use the (cursor left/right) buttons
to select either 'Wide screen (16:9)' or
'Standard size screen (4:3)' according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 66 if you're not sure which one to choose.
Let's Get Started Menu Let's Get Started Menu
What kind of TV do you have? What kind of TV do you have?
Use the Use the / /
to choose, then press [ENTER] to choose, then press [ENTER]
Wide screen (16:9) Wide screen (16:9)
Next
cursor buttons cursor buttons
Standard size screen (4:3) Standard size screen (4:3)