Speakers Settings; Parental Lock - Pioneer XV-DV250 Operating Instructions Manual

05 Initial Settings menu

Speakers settings

Setting
Speaker Distance

Parental Lock

• Default level: Off; Default password: none;
Default Country/Area code: us (2119)
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won't play.
Some discs also support the Country/Area
Code feature. The player does not play certain
scenes on these discs, depending on the
Country/Area Code you set.
Registering a new password
Register a password to change the Parental
Lock level or enter a Country/Area code.
1 Select 'Password'.
Initial Settings
Video Output
Language
Display
Options
Speakers
2 Use the number buttons to input a 4-digit
password then press ENTER .
Changing your password
To change your password, confirm your
existing password then enter a new one.
1 Select 'Password Change'.
2 Input your existing password, then press
ENTER .
3 Enter a new password and press ENTER .
Note
1 • Not all discs use Parental Lock, and will play without requiring the password first.
• If you forget your password, you'll need to reset the player to register a new password. (see Resetting the system on page 36)
22
En
Option
–
Parental Lock Password
Level Change
Country Code
What it means
Specify the distance of your speakers from your listening
position (see Speaker Distance on page 23).
Setting/changing the Parental Lock
1 Select 'Level Change'.
2 Use number buttons to enter your
password, then press ENTER .
3 Select a new level and press ENTER .
• Press
more levels (more discs will require the
password); press
unlock levels. You can't lock level 1.
Setting/changing the Country/Area code
You can find the Country/Area code list on
page 37.
1 Select 'Country Code'.
1
2 Input your password, then press ENTER .
3 Select a Country/Area code then press
ENTER .
There are two ways you can do this:
• Select by code letter: Use
down) to change the Country/Area code.
• Select by code number: Press
right) then use the number buttons to enter
the 4-digit Country/Area code.
The new Country/Area code takes effect after
ejecting the disc once.
(cursor left) repeatedly to lock
(cursor right) to
(cursor up/
(cursor